Skip to content
ATS Mako
Hiring events guide

How to Run a Hiring Event or Open House That Fills Your Training Class

A hiring day only counts if people show up on the first day of training. This guide covers how to run a hiring event from headcount target to follow-up, with the stations, staffing list and numbers to watch.

Updated November 7, 2026 11 min read

If you need to know how to run a hiring event that actually fills a training class, start at the end and work backward. The goal is not a busy lobby. The goal is a full class of people who accepted an offer, cleared their checks and show up ready on day one. Everything in this guide serves that goal: the targets you set, how you promote, how candidates move through the room, how fast you decide and how you follow up.

This is written for branch managers, recruiters and HR leaders in retail, hospitality and call centers, where one event often has to staff a whole cohort or a seasonal ramp. The same playbook works for a formal open house, a walk-in interview day or a recurring weekly hiring session.

Why a hiring day works for high-volume roles

For hourly and entry-level roles, the slowest part of hiring is usually the gap between steps. A candidate applies, waits for a call, waits for an interview slot, waits for a decision. Each wait is a chance to take another job. A well-run event collapses those steps into one visit. Candidates meet the team, see the workplace, interview and often leave with an offer or a clear next step.

It also helps the hiring team. Managers block one morning instead of scattering interviews across two weeks. Recruiters can compare candidates side by side. And the training team gets a predictable list of starters well before the class date.

Step 1: Set goals and headcount targets

Most events that fall short were planned around a vague goal like "get as many people as we can." Pick a specific number of starters for a specific class date, then work backward.

Work backward from the class size

Every stage between registration and day one loses people. Some registrants will not show. Some attendees will not qualify. Some offers will be declined. Some accepted hires will drop before training. Use your own past events to estimate the drop at each stage. If you have no history, run the first event conservatively, over-invite and treat it as the baseline you will measure against next time.

  • Starters needed: the number of seats in the training class.
  • Accepted offers needed: starters plus a buffer for pre-start drop-off.
  • Offers to make: accepted offers plus a buffer for declines.
  • Attendees needed: offers plus a buffer for candidates who do not qualify.
  • Registrations needed: attendees plus a buffer for no-shows.

Decide what kind of event you are running

Be clear about format before you promote it. A pre-registered open house with scheduled time slots gives you control over flow and staffing. A walk-in interview day reaches people who would never fill out a form in advance but is harder to staff. Many teams run a hybrid: time slots for registered candidates with a walk-in lane kept open.

Hiring event planning sheet

Event name and date:
Roles and locations being hired:
Training class start date:
Starters needed:
Target accepted offers:
Target offers made:
Target attendees:
Target registrations:
Format (pre-registered slots / walk-in / hybrid):
Venue and parking notes:
Who can approve an offer on the day:
Pre-start requirements (paperwork, checks, uniform, schedule availability):
Event owner:

Fill this in before any promotion goes out. If you cannot name who approves offers on the day, fix that first.

Step 2: Promote and pre-register candidates

Promotion should push every interested person toward one action: register for a time slot. Registration gives you a name, a phone number and a way to remind them. A flyer with only an address gives you none of that.

Where to promote

  • Job postings for each role, with the event date and a registration link in the first lines.
  • Your existing applicant pool: past applicants who were a fit but were not hired, and silver-medalist candidates from earlier classes.
  • Text messages to applicants who applied in recent weeks but never booked an interview.
  • Signage and table cards in your own locations, since customers and their families are a common source of hourly hires.
  • Employee referrals, with a simple link staff can forward.
  • Local community boards, schools and workforce organizations where appropriate.

Make registration short

Ask for what you need to plan the day and nothing more: name, mobile number, role of interest, location preference and availability for the training schedule. Put deeper questions into the screen, not the form. Every extra field costs registrations.

Screen before the event, not at the door

Pre-screening keeps unqualified candidates from taking interview slots and keeps your managers focused on people who fit. In ATS Mako, AI voice screening can run the first-round screening conversation with registrants, and AI candidate ranking helps recruiters see who to prioritize when slots are limited. Recruiters still make the call on who gets invited; the tools handle the volume.

Remind people until they arrive

No-shows are the biggest leak in most events, and reminders are the cheapest fix. Send a confirmation right after registration, a reminder the day before and a short text the morning of the event with the address, parking and what to bring. ATS Mako sends these by native SMS and the integrated email client, and you can set them up once as automated engagement workflows so every registrant gets the same sequence. Let candidates reply to reschedule instead of silently skipping.

Step 3: Stations and flow for the day

Plan the room like a line, not a waiting area. Candidates should always know where to go next, and no station should sit idle while another has a queue. Walk the route yourself the day before.

StationWhat happensWho staffs itWatch for
Check-inGreet, confirm registration, capture walk-ins, hand out a station cardFront desk lead or recruiterWalk-ins backing up the registered line
Welcome and overviewShort talk on the role, pay structure, schedule, training dates and cultureBranch or site managerRunning long and delaying interviews
Paperwork or kioskComplete application details, availability and any required formsCoordinatorMissing documents that stall offers later
InterviewStructured interview using the same questions for every candidateHiring managers and team leadsInconsistent questions across interviewers
Assessment or job previewRole-specific exercise, shadowing or tourExperienced team memberBottlenecks if the exercise takes too long
Decision and offerRecruiter reviews scores, makes offers or sets clear next stepsRecruiter with offer authorityCandidates leaving without knowing their status
Onboarding startBook orientation, collect start paperwork, confirm training dateCoordinator or onboarding leadOffers accepted with no class date attached

Use structured interviews

When several managers interview in parallel, use one question set and one scorecard. It keeps decisions fair and comparable and makes the decision station fast. The AI writing assistant can draft role-specific interview questions ahead of time for you to review. If you are interviewing candidates together, the guide on running a group interview for high-volume roles covers format and scoring in more detail.

Plan for remote candidates and second locations

Some strong candidates cannot attend in person. Offer a virtual slot using built-in video interviews so they go through the same questions and scorecard. If you hire for several sites, run each location's slots on its own calendar so candidates book the site they will actually work at. Interview scheduling and calendar settings let you set those slots by location and interviewer.

Step 4: Same-day decisions and offers

Speed is the reason to hold an event. If candidates leave with "we will be in touch," you have run an expensive set of ordinary interviews. Decide what can be offered on the spot before the day starts.

  • Name who has authority to extend an offer during the event, and make sure that person is in the building all day.
  • Agree on the scorecard threshold for an on-the-spot offer and for a "hold" decision.
  • Prepare offer details in advance: pay, schedule, location, training dates and any conditions such as background checks.
  • Have a clear script for candidates who are not a fit today, so they leave with a respectful answer.
  • For "hold" candidates, give a specific day they will hear back, then keep that promise.

Conditional offers that depend on checks or documents should say so plainly. Follow your company's existing policies and your legal team's guidance on what an offer can include and when; this guide does not cover employment law.

Attach the training date to the offer

An accepted offer without a start date is a soft yes. Book orientation before the candidate leaves the building. ATS Mako handles interview scheduling and onboarding in the same system, so the new hire can be booked into a session and start paperwork while they are still engaged. The page on orientation scheduling for new hires goes deeper on keeping classes full between offer and day one.

Step 5: Follow up within a day

The event ends; the hiring does not. Every candidate who attended should hear from you by the next business day, whatever their status. Silence after an event damages your reputation with applicants, and in local hourly markets word travels fast.

  • Offer accepted: send a confirmation with start date, time, location, dress code and what to bring.
  • Offer extended but not accepted: send the offer in writing and a short note inviting questions.
  • On hold: give a specific date for a decision.
  • Not selected: send a polite close and, where appropriate, invite them to apply for other roles.
  • Registered but did not show: invite them to the next event or an individual interview slot.

Next-day text to new hires

Hi [First name], thanks for coming to the [Company] hiring day. You're confirmed for training on [date] at [time], [location]. Please bring [documents]. Reply to this text if anything changes or you have questions.

Keep it short and specific. Send from a number candidates can reply to, and route replies to a person who will answer.

Between offer and start, keep in touch. A short check-in text, a reminder of the training date and a welcome note from the trainer all reduce pre-start drop-off. Real-time engagement tracking shows which new hires opened and replied to messages, so recruiters can call the ones who went quiet before the class date.

Step 6: Measure show rate and conversion

You cannot improve the next event without numbers from this one. Track each stage of the funnel and compare it to the targets on your planning sheet.

MetricHow to calculate itWhat it tells you
Registration volumeTotal registrations for the eventWhether promotion reached enough people
Show rateAttendees divided by registrationsHow well confirmations and reminders worked
Qualified rateCandidates who met the bar divided by attendeesWhether pre-screening and job ads attracted the right people
Offer rateOffers made divided by qualified candidatesWhether the scorecard and offer authority were set up well
Acceptance rateOffers accepted divided by offers madeWhether pay, schedule and the candidate experience were competitive
Day-one show rateStarters on training day divided by accepted offersHow well you kept new hires engaged before the class
Source of startersStarters grouped by where they heard about the eventWhich promotion channels to repeat

Look at the stage with the biggest drop first. A low show rate points to reminders and confirmation. A low qualified rate points to screening and job ads. A low day-one show rate points to the gap between offer and training. Recruiting reporting and analytics in ATS Mako can break these numbers out by location and source, which matters when you run events across several branches.

Event-day staffing list

Short-staffing is one of the most common reasons an event runs slow. Assign every role by name and share the list with everyone involved.

  • Event owner: accountable for the targets and makes calls when plans change.
  • Check-in lead: greets candidates, confirms registrations and routes walk-ins.
  • Presenter: delivers the welcome and overview on schedule.
  • Interviewers: hiring managers and team leads, briefed on the scorecard in advance.
  • Job preview guide: runs tours, shadowing or assessments.
  • Decision recruiter: reviews scores and extends offers, with authority to do so.
  • Onboarding coordinator: books orientation and starts paperwork.
  • Floater: covers breaks, refreshes supplies and moves to whichever station has a queue.
  • Remote support: monitors texts and replies from registrants who are running late or rescheduling.

Common mistakes to avoid

  • Planning around attendance instead of starters. A packed room means nothing if the class is half empty on day one.
  • Skipping registration. Without names and numbers you cannot remind people, and no-shows climb.
  • Screening at the door. It wastes interviewer time and frustrates candidates who travelled for nothing.
  • Letting interviewers improvise. Different questions make decisions slow and hard to defend.
  • No one with offer authority on site. Candidates leave without an answer and accept other jobs.
  • Going quiet after the event. Candidates who hear nothing assume the worst.
  • Not measuring. Without funnel numbers, each event starts from guesswork.

Hiring open house checklist

  1. 1 Weeks before Confirm class date and seats, fill the planning sheet, book the venue, name the event owner and offer approver, publish postings with a registration link.
  2. 2 As registrations come in Pre-screen registrants, confirm time slots by text, invite past applicants and referrals, track registrations against target.
  3. 3 The week of the event Brief interviewers on questions and scorecard, prepare offer details, print station cards and signage, assign every staffing role.
  4. 4 The day before Send reminders with address, parking and what to bring. Walk the room flow. Test any video or kiosk setup.
  5. 5 Event day Run check-in on time, keep the overview short, keep interviews structured, make offers on the spot and book orientation before candidates leave.
  6. 6 The next day Contact every attendee and no-show, send written offers and start-date confirmations, record funnel numbers.
  7. 7 Before training starts Check in with new hires, follow up with anyone who went quiet and backfill open seats from your hold list.

Make the next event easier

The first event takes the most work. After that, reuse what worked: the same registration form, reminder sequence, scorecard, offer script and follow-up messages. Compare each event's funnel to the last and change one thing at a time. Teams that hire for recurring cohorts often move to a fixed weekly or monthly schedule so candidates always have a date to register for. For more on running repeat events from one system, see how ATS Mako supports hiring event management and call center training class hiring.

Run your next hiring day from one system

See how ATS Mako handles registration, SMS reminders, AI screening, scheduling and onboarding for high-volume, multi-location hiring.

FAQ

Questions, answered.

How far in advance should I plan a recruiting event?

Start from the training class date and work backward. Leave enough time to promote, collect registrations, pre-screen and send reminders, plus time after the event for checks and paperwork before day one. If you are unsure, plan earlier than feels necessary on your first event and adjust based on how long each stage actually took.

Should I allow walk-ins or require registration?

Registration gives you a way to remind candidates and plan staffing, which usually improves show rates. Walk-ins reach people who would not register in advance. Many teams use registered time slots with a separate walk-in lane so neither group slows the other down.

Can I make job offers at a walk-in interview day?

Yes, if you decide in advance who has authority to offer, what scorecard threshold qualifies, and what the offer includes. Offers that depend on checks or documents should be stated as conditional. Follow your company's own policies and legal guidance on offer terms.

What is the most important number to track after a hiring event?

Day-one show rate, meaning how many accepted hires actually start training. It is the number that tells you whether the class is full. Track every stage before it too, so you can see where candidates dropped out.

How do I reduce no-shows at a hiring open house?

Ask candidates to confirm a specific time slot, send a confirmation right after they register, a reminder the day before and a short text the morning of the event. Make it easy to reply and reschedule so people tell you instead of skipping.

Build a faster, smarter hiring engine.

Start your 30-day free trial — no setup fees, no contracts. Or see ATS Mako in action.

30-day free trial · No setup fees · No long-term contracts